To use the Default Key:
Press the [Voice/Function] button to enter Function Mode.
Voice / -
Function
Press the special function key for the Function Mode parameter you would
like to return to its default value. (The Program parameter was chosen for this
example picture.)
Cancel
Panic
Data Contr Assign
Bank MSB
Bank LSB
Program
Default
9
8
7
6
5
4
3
2
1
0
Enter
F#5
46
Default Key(F5)
The Default Key can be used to reset any one of the following Function Mode
parameters to its default value:
--- Program (F#5) --- Bank LSB (Ab5)
--- Bank MSB (Bb5) --- Data Ctrl Assign (C#6)
When applying the Default Key to Program, Bank LSB, or Bank MSB, those
parameters will be returned to their default value of zero. When the Default Key is
applied to the Data Ctrl Assign parameter, the Data Control knob will be returned to
its default Voice Select functionality.
To Next Page
Loading...