Defaults
Default Settings
The table below shows the piano factory default settings and whether or not user
changes to these settings are retained after a power-cycle (turning the device off and on):
Parameter Factory Default Retained on Power-Down
Program Number & Voice Selected
Bank MSB Number
Bank LSB Number
Main MIDI Transmit Channel
Octave shift
Transpose
Local
Data Control Assignment
Reverb On/Off
Reverb Depth
Velocity Curve Selected
Split Point
Voice Volume
Layer Volume
Split Volume
Metronome Volume
Master Tune
Tempo
Layer Mode Voice
Split Mode Voice
Layer Mode On/Off
Split Mode On/Off
000 - Grand Piano
000
000
Channel 1
0
0
On
Data = Voice Select
Reverb On
Defaults for each sound
NORMAL
Eb3
127
100
127
127
0
120
n/a
8 - Upright Bass
Off
Off
No
No
No
No
No
No
No
No
Yes - store for each sound
Yes - store for each sound
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
n/a
Yes
No
No
51
At power-on, the following MIDI data will be sent to the sound engine, the USB
MIDI and the MIDI Out:
1. Bank Change MSB=0, LSB=0, PGM=0 - Set sound engine to piano voice
2. Reverb default value
3. Chorus default value
To Next Page
Loading...