Samson 3510 Series - 15 Annex; Tightening Torques, Lubricants and Tools; Spare Parts

EB 8091 EN 15-1
Annex
15 Annex
15.1 Tightening torques, lubricants and tools
uAB0100 for tools, tightening torques and lubricants
15.2 Spare parts
1 Body
2 Trim
2.1 Plug with plug stem
2.2 Seat
2.3 Body gasket
2.4 Anti-rotation xture
3 Bellows (assembly)
3.1 Plug stem with metal bellows
3.2 Seal
3.3 Bellows nut
3.4 Seal (on intermediate piece)
3.5 Bottom anti-rotation xture
4 Intermediate piece
5 Seal
6 Fillister head screw
7 Bellows seal
8 Seal
9 Seal
10 Packing washer
11 Slotted round nut
12 Threaded bushing (packing nut)
13 Yoke
14 Travel indicator scale
15 Retaining plate
16 Countersunk screw
17 Bearing sleeve
18 Disk spring
19 Packing washer
20 Hex nut
21 Snap ring
22 Plug stem extension
23 Fillister head screw
24.1 Bottom anti-rotation xture
24.2 Top anti-rotation xture (two-piece)
25 Washer
26 Hex nut
27 Washer
28 Insulating section
29 Seal for test connection
30 Screw plug
32 Yoke (ready mounted)
34 Packing
37 Lower part of the stem connector
(assembly)
Trims (2.1 to 2.4) and metal bellows (3.1 to
3.5) are only available as spare parts as
assemblies (2 and 3).
The seals (2.3 and 3.4) are also available
separately.
Note