Samson 3510 Series - After-Sales Service

EB 8091 EN 15-3
Annex
15.3 After-sales service
Contact our after-sales service for support
concerning service or repair work or when
malfunctions or defects arise.
E-mail contact
You can reach our after-sales service at
aftersalesservice@samsongroup.com.
Addresses of SAMSONAG and its subsid-
iaries
The addresses of SAMSON AG, its subsid-
iaries, representatives and service facilities
worldwide can be found on our website
(www.samsongroup.com) or in all SAMSON
product catalogs.
Required specications
Please submit the following details:
− Order number and position number in
the order
− Type, model number, nominal size and
valve version
− Consecutive number of installed trim
− Pressure, density, viscosity and tempera-
ture of the process medium
− Flow rate in m³/h
− Direction of ow
− Bench range of the actuator (e.g. 0.2 to
1bar)
− Is a lter installed?
− Installation drawing