Samson TROVIS 5571 - Page 19

Open the service menu.
Display: Service
The 'Language' menu item is highlighted.
Activating the system configuration
Select 'Anlage konfigurieren' (Configure system)
menu item.
Activate the editing mode for 'Anlage konfigurieren'
(Configure system).
The system configuration starts with system Anl 1.0
(two heat exchangers).
Select third heat exchanger.
Confirm selection.
Select heating circuit 1.
Select heating circuit 2.
Confirm selection.
EB 5571-2 EN 19
Start-up
VL
RL
VL
RL
Service
Language
Anlage konfigurieren
Wärmetauscher 1
Wärmetauscher 2
Wärmetauscher 3
Heizkreis 1
Zurück