Troubleshooting
4-30 Samsung Electronics
■ Error detection and reoperation
● If an error occurs during the operation, an LED flickers and the operation is stopped except the LED.
● If you re-operate the air conditioner, it operates normally at first, then detect an error again.
■ Indoor unit LED lamp display at error detecting
- Wall-mounted type (Neo Forte without EEV/with EEV)
Abnormal conditions
LED lamp display
Remark
OPERATION TIMER TURBO
Indoor unit room temperature sensor error
(open or short)
Indoor unit heat exchanger temperature sensor error
(open or short)
Indoor fan motor malfunction
EEPROM error Option Setting
Option error
(option wasn t set up or option data error)
Option Setting
Outdoor unit error
Remote Control on/off
Outdoor Unit Power Reset
$9;&6+B$BaLQGG
To Next Page
Loading...
