HOMI
•
If
your
1V
is
not compatible with compressed
multi-channel formats (Dolby Digital,
DTS),
the
player may output PCM 2ch downmixed audio
even though you set Bitstream(either Re-encode
or
Audiophile) on your setup menu.
•
If
your
1V
is
not compatible with PCM sampling
rates over 48kHz, the player may output 48kHz
downsampled PCM audio even though you set
PCM Downsampling
to
Off.
Dynamic Range Control
You can listen at low volumes but still hear dialog
clearly.
This
is
only active when a Dolby Digital signal
is
detected.
• Auto: The Dynamic Range Control will be set
automatically based on the information provided
by the Dolby TrueHD Soundtrack.
• On : When Movie soundtracks are played at low
volume or from smaller speakers, the system
can apply appropriate compression to make
low-level content more intelligible and prevent
dramatic passages from getting too loud.
•
Off:
You can enjoy the movie with the standard
Dynamic Range.
Downmixing Mode
Set whether to downmix the multi-channel audio
into fewer channels.
• Normal Stereo: Downmixes the multi-channel
audio into
two
channel stereo. Choose when
connected
to
equipment that does not support
virtual surround functions such as Dolby Pro
Logic.
• Surround Compatible: Downmixes multi-
channel audio into surround compatible stereo.
Choose when connected
to
equipment that
supports virtual surround functions such as
Dolby Pro Logic.
DTS Neo:6
You can enjoy multi-channel sound from a simple
2-channel audio source.
• Off : Outputs a 2-channel audio signal through
the front speakers only.
• Cinema: Select this
if
you want to play
2-channel movie sound over multi-channels.
• Music: Select this
if
you want
to
play 2-channel
music sound over multi-channels.
~
NOTE
•
If
you
are
using
HDMI
receiver,
this
option
is
available
when
you
set
Digital
Output
setup
as
peM.
System
Initial Settings
By using Initial Settings, you can set language,
1V
aspect and Network Settings, etc.
For more information on the settings, refer to the
corresponding section
in
this user manual.
(See
pages
29-43)
Internet@TV Screen Size
Set the Internet@1V Screen to the optimal size.
• Size 1 : Display smaller application icons, you
may see some black on sides of screen.
• Size 2 : Display normal application icons, image
may be too large for your
1V
screen.
• Size 3 : Display larger application icons, image
may be too large for your
1V
screen.
Anynet+(HDMI-CEC)
Anynet+
is
a convenient function that offers linked
operations with other Samsung players with the
Anynet+ feature.
To operate this function, connect this player to a
Samsung
1V
with
an
HDMI cable.
You can operate this player using a Samsung
1V
remote control and start disc playback simply
by pressing the
PLAY
( ) button on the
1V's
remote control.
For more information, please see the
1V
user
manual.
• On : Anynet+ functions will work.
•
Off:
Anynet+ function will not work.
English
35
ff
c
"0
To Next Page
