Samsung CLX-8385ND Series - Optional Service; Adjusting the color contrast

12.12 < Machine status and advanced
Optional Service
When you want to add the optional features for this machine, you have to
install the optional kit and then set the machine to enable and activate
those features. Follow the next steps to enable those features.
1 Pr
ess Machine Setup on the control panel.
2 Pr
ess Admin Setting. When the login message pops up, then enter
password and press OK.
3 Pre
ss the Setup tab > Optional Service.
Option Description
Copy Enables or disables the Copy men
u from the
main screen.
Analog Fax After installing the fax kit, select this option
Enable to use this machine as a fax machine.
Scan to Email Enables or disables the Scan to Email menu
from the scan screen.
Scan to PC Set Enable to activate the scanning and
sending it via network.
Scan to SMB Enables or disables the Scan to SM
B option
from the scan screen.
Scan to FTP Enables or disables the Scan to FTP option
from the scan screen.
Manual Image
Overwrite
You can set the machine to delete previous job
information on HDD as you store new job
information. Set this option to
Enable , go to the
General tab > Manual Image Overwrite, press
Start in the display to start the overwriting job.
Automatic Image
Overwrite
If you select
Enable , the machine renews the
HDD memory when you save new job on it.
Adjusting the color contrast
This menu allows you to adjust the color setting.
1 Pr
ess Machine Setup on the control panel.
2 Pr
ess Admin Setting. When the login message pops up, then enter
password and press OK.
3 Pr
ess the Setup tab > Color.
Option Description
Toner Density
Calibration
This item allows you to calibrate toner density for the
best possible color print quality.
Custom Color This item allows you to adjus
t contrast, color by
color.
CMYK: Allows you to adjust th
e contrast of the toner
in each toner cartridge.
• Default:
Optimizes colors automatically.
• Manual Adjust: Allows you to manually
adjust the color contrast for each cartridge.
Note: You should use the Default setting for best
color quality.