5.9 <
Copying>
Cover copying
The machine automatically adds covers to your copied set using stock
taken from a different tray. Covers must be the same size and orientation
as the main body of the job.
1 Pl
ace the originals face up in the DADF. Or place a single original
face down on the scanner glass. (Page 4.1)
2 Press Copy from the Main screen.
3 S
elect the tray in Paper Supply.
4 Press the Advanced tab > Covers.
Note
Once you have set the Paper Supply option to Auto, you
cannot use this feature.
5 Pr
ess On to use this feature, and select detailed settings for each
option.
• Position: Selects whether the cover will be placed at the front,
back, or both.
• Cover Sheet: Selects whether the cover will be 1 sided, 2 sided, or
blank paper.
• Paper Source: Select the paper tray, where the cover sheet is
loaded.
6 Pr
ess OK.
7 Press Start on the control panel to begin copying.
Transparency copying
When you prepare transparencies for presentations, use this feature to
copy the information.
Note
Before you start this special copy job, set the tray's Paper Types
and Paper Size to Transparency.(Page 4.9)
1 Pl
ace the originals face up in the DADF. Or place a single original
face down on the scanner glass. (Page 4.1)
2 Load
the right-sized transparencies into the tray you have set.
3 Set the paper type to Transparency.
4 Press Copy from the Main screen.
5 Pre
ss the Advanced tab > Transparencies.
6 Select Transparencies option.
• No Se
parator: Does not place separator sheets between
transparencies.
• Black Sheet: Places a blank sheet between transparencies.
• Printed Sheet: Places the same image on the divider sheets as
printed on the transparency.
7 Se
lect media sources, in case you selected either Black Sheet or
Printed Sheet.
8 Press OK.
9 Press Start on the control panel to begin copying.
Watermark copying
You can copy the original with a watermark. For example, you can use it
when you want to have large gray letters such as Top Secret or
Confidential printed diagonally across the first page or all pages of the
copy.
1 Place the orig
inals face up in the DADF. Or place a single original
face down on the scanner glass. (Page 4.1)
2 Press Copy from the Main screen.
3 Select th
e tray in Paper Supply.
4 Press the Advanced tab > WaterMark.
5 Select Wa
terMark option.
• Off: Disab
les this feature.
• Top Secret: Prints the original with Top Secret text.
• Confidential: Prints the original with Confidential text.
• Urgent: Prints the original with Urgent text.
• Draft: Prints the original with Draft text.
• Custom: The machine prints the original with the customized text.
6 Select 1st Page
only, Size, Position, Darkness of options.
7 Press OK.
8 Pr
ess Start on the control panel to begin copying.
To Next Page
Loading...
