6.12 <
Faxing (Optional)>
8 Press Edit Mailbox.
9 Press Mailbox ID and enter ID with number keypad on the control
panel. Up to 20 numbers you can enter.
10 En
ter Mailbox Name with the pop up keyboard. It can be either
alphabet or number up to 20 digits.
11 En
ter Mailbox Passcode with the numeric keypad on the control
panel.
Note
If you set Mailbox Passcode to number 0000, then the
machine does not ask passcode for using Mailbox, such as
storing, deleting, printing, receiving.
12 Se
t Notification option to On, if you want to be notified when a fax
is received into Mailbox.
13 Press OK.
Storing originals in Mailbox
Since you created the mailbox, you can store originals in it.
1 Pr
ess Fax from the Main screen.
2 Place the originals face up in the DADF. Or you can use the scanner
glass with a single original document faced down.
3 Adjust the document settings in the Image tab and the Basic tab.
4 Pre
ss the Advanced tab > Mailbox > Store.
5 Enter Mailbox No. and Passcode which are set from Creating
Mailbox in page 6.11.
6 Pr
ess OK.
Faxing to a remote Mailbox
To fax and store the originals in a recipient's Mailbox in this machine, you
can use the Send to Remote feature.
1 Press Fax from the Main screen.
2 Place
the originals face up in the DADF. Or you can use the scanner
glass with a single original document face down.
3 Adjust th
e document settings in the Image tab and the Basic tab.
4 Pr
ess the Advanced tab > Mailbox > Send to Remote.
5 Enter Rem
ote Fax No, Mailbox No., and Passcode. All these field
are filled with information from the receiver.
6 Press OK.
Note
• Deleting the data in a specific Mailbox
Press Fa
x > the Advanced tab > Mailbox > Delete, enter
Mailbox No. and Passcode, and then press OK. When the
confirmation window appears, press Yes to complete the job.
• Printing a
Mailbox
Press Fa
x > the Advanced tab > Mailbox > Print, enter
Mailbox No. and Passcode, and press OK.
To Next Page
Loading...
