Samsung CLX-8385ND Series - Printing a report

12.15 < Machine status and advanced
Printing a report
You can print a report on the machine's configuration or font list, etcetera.
1 Pr
ess Machine Setup on the control panel.
2 Pr
ess Admin Setting. When the login message pops up, then enter
password and press OK.
3 Pre
ss the Print/Report tab.
Option Description
Print You can print Networ
k
Configuration, PS3 Font List, PCL
Font List and Schedule Jobs
Report. Schedule Jobs Report
shows the job list in pending, in
waiting, in delayed faxing or the
Mailbox list as well.
Accounting
Report
s
Supplies
Information
You can print the amount of each
category that your machine has
printed so far.
Network Auth.
Lo
g Report
It displays user login IDs and emails.
Usage Page
Re
port
You can print the report on the
amount of printouts depending on the
paper size and type.
Accounting
Re
ports
Prints the report of printing out count
for each login user. This is used only
when network authentication in
enabled with SyncThru™ Web
Service. (Page 13.9)
Standard Acct.
Us
age Report
Prints the used amount of Standard
Accounting
Standard Acct.
Re
main
Report
Prints the remained amount of
S
tandard Accounting
Report Configuration
Report
You can print a report on the
machine's overall configuration.
Fax Report You can set to print the information of
a fax
reports.
• Mu
lti Send Report: When you fax
to several destination, set this
option to print a transmission report.
On is to print every time you send a
fax, the machine prints a
confirmation report. With On-Error,
only when the transmission error
occurred, the report will be printed
out.
• Fa
x Send Report Appearance:
You can select whether the image
on the confirmation report shows or
not.
• F
ax Sent/Received Report: The
machine stores the logs on each
transmission and prints out every
50 logs with this option On. It you
select Off, the machine stores the
logs but does not print.
• Fa
x Send Report: The machine
prints the confirmation report after
each fax job, only when you send a
fax to one destination.
Report
(Continue)
E-mail
Confirma
tion
Report
The report shows the job of scanning
and
sending it via Scan to Email.
• On: The
report is printed whether a
job successfully completed or
failed.
• Off: No rep
ort is printed after
completing a job.
• On
-Error: Only in case of error
occurrence, the machine prints the
report.
Scan to Server
Confirma
tion
The report shows the job of scanning
and sending it via SMB and FTP.
• On: The
report is printed whether a
job successfully completed or
failed.
• Off: No rep
ort is printed after
completing a job.
• On-Error: Only in case of error
occurrence, the machine prints the
report.
Clean Fuser
You can clean the inside of a fuser
roller by printing a cleaning paper.
You can select among On, Off, Print
Now. Default setting is On.
Option Description