Samsung CLX-8385ND Series - Forwarding a received fax to other destination by an email; Setting up the end fax tone

6.15 < Faxing (Optional)>
Forwarding a sent fax to other destination by
server
Note
If Forward to Email Setting is on, this option will be grayed out.
The server setting must be done in SyncThru™ Web Service
prior to this option on.
1 Pr
ess Machine Setup on the control panel.
2 Pr
ess Admin Setting. When the login message pops up, enter
password and press OK. (Page 3.5)
3 Press the Setup tab > Fax Setup.
4 Press down arrow on the right side.
5 Pr
ess Fax Forward Settings > Forward to Server Setting > Send
Forward.
6 Press On.
7 Press OK.
Forwarding a received fax to other destination by
server
Note
If Forward to Email Setting is on, this option will be grayed out.
The server setting must be done in SyncThru™ Web Service
prior to this option on.
1 Pr
ess Machine Setup on the control panel.
2 Pr
ess Admin Setting. When the login message pops up, enter
password and press OK. (Page 3.5)
3 Pre
ss the Setup tab > Fax Setup.
4 Pre
ss down arrow on the right side.
5 Pr
ess Fax Forward Settings > Forward to Server Setting >
Receive Forward.
6 Pr
ess Forward.
7 Pr
ess OK.
Setting up the end fax tone
The end fax tone that sounds to indicate that the fax has been received
can be turned on or off.
1 Pr
ess Machine Setup on the control panel.
2 Press Admin Setting. When the login message pops up, enter
password and press OK. (Page 3.5)
3 Pr
ess the Setup tab > Fax Setup.
4 Press down arrow on the right side.
5 Press Fax Ending Sound.
6 Pr
ess On.
7 Pr
ess OK.
Setting up receiving faxes in color
This function allows you to recieve faxes in color.
1 Pr
ess Machine Setup on the control panel.
2 Pr
ess Admin Setting. When the login message pops up, enter
password and press OK. (Page 3.5)
3 Pr
ess the Setup tab > Fax Setup.
4 Pre
ss down arrow on the right side.
5 Pr
ess Rx Color Printing.
6 Press On.
7 Pr
ess OK.