Samsung CLX-8385ND Series - Scanning; Scanning with Network; Scanning with USB

Using Your Printer with a Macintosh
49
Scanning
You can scan docoments using Image Capture program.
Macintosh OS offers Image Capture program.
Scanning with USB
1 Make sure that your machine and computer are turned on
and properly connected to each other.
2 Place a single document face down on the document glass.
OR load the document(s) face up into the ADF (or DADF).
3 Start Applications and click Image Capture .
N OTE : If No Image Capture device connected message
appears, disconnect the USB cable and reconnect it. If the
problem persists, please refer to the Image Capture ’s help.
4 Set the scan options on this program.
5 Scan and save your scanned image.
N OTE :
• For more information about using
Image Capture , please
refer to the
Image Capture ’s help.
• Use TWAIN-compliant softwares to apply more scan options.
•
You can also scan using TWAIN-compliant softwares, such as
Ad
obe Photoshop.
•
Scan process differs according to TWAIN-compliant
so
ftwares. Please refer to the user’s guide of the software.
•
When scanning does not operate in
Image Capture , update
Mac OS to the latest version. Scanning operates propery in
Mac OS 10.3.9 or higher and Mac OS 10.4.7 or higher.
Scanning with network
1 Make sure that your machine and computer are turned on.
2 Place a single document face down on the document glass.
OR load the document(s) face up into the ADF (or DADF).
3 Start Applications and click Image Capture .
4 For MAC OS X 10.4~10.5
Click
Devices and click Browse Devices .
For MAC OS X 10.6
Se
lect your device below SHARED. Skip to step 7.
5 For MAC OS X 10.4:
Select your machine in
Twain devices option. Make sure
that
Use TWAIN software checkbox is checked, and click
Connect .
If a warning message appears, click
Change Port.. to
select port .
If TWAIN UI appears, from the Preference tab, click
Change Port.. to select port .
For MAC OS X 10.5:
Ma
ke sure that
Connected checkbox is checked beside
your machine in Bonjour Devices .
If you want to scan using TWAIN, refer to the MAC OS X
10.4 procedure above.
6 Set the scan options on this program.
7 Scan and save your scanned image.
N OTE :
• For more information about using
Image Capture , please
refer to the
Image Capture ’s help.
• Use TWAIN-compliant softwares to apply more scan options.
•
You can also scan using TWAIN-compliant softwares, such as
Adobe Photoshop.
•
Scan process differs according to TWAIN-compliant
so
ftwares. Please refer to the user’s guide of the software.
•
When scanning does not operate in
Image Capture , update
Mac OS to the latest version. Scanning operates propery in
Ma
c OS 10.3.9 or higher and Mac OS 10.4.7 or higher.
• For MAC OS X 10.3, use TWAIN-compliant softwares.