Samsung CLX-8385ND Series - ID card copying

5.6 < Copying>
ID card copying
The machine prints one side of the original on the upper half of the paper
and the other side on the lower half without reducing the size of the
original. This feature is helpful for copying a small-sized item, such as a
business card.
Note
The original must be placed on the scanner glass to use this
feature.
1 Place the front side of an original facing down on the scanner glass
where arrows indicate as shown, and close the scanner lid.
2 Pr
ess Copy from the Main screen.
3 Pre
ss the Advanced tab > ID Copy.
4 Pr
ess Start on the control panel.
Then the machine starts scanning the front side.
5 T
urn the original over and place it on the scanner glass, where
arrows indicate as shown. Then, close the scanner lid.
6 Pr
ess Start on the control panel to begin copying.
Note
If this option is grayed out, select the Duplex option to 1 -> 1
Sided.
Copying ID with the manual ID copy option
If you want to copy several ID cards on a paper, or adjust the copying
position of the page, follow the next steps.
Next steps are the procedure when you copy two people's driver's license
cards (100mm X 80mm) in one page.
1 Pr
ess Machine Setup on the control panel.
2 Select Admin Setting.
When the login message pops up, then
enter password and press OK.
3 Press the Setup tab > Copy Setup > Mamual ID Copy Setup.
4 Press the number from the template list table.
5 Pr
ess Edit Template.
6 Selec the
appropriate option values and press OK.
• Template Name: Enter the template name.
• Scan Position: Select the position for scanning. You should select
the largest scanning position out of the originals.
LEFT, TOP : X-000mm/Y-000mm, RIGHT, BOTTOM: X-110mm/Y-
090mm
• Number of Images: Select how many images are on a page.
(select number 4.)
• Image Position: Select the position of a page which images are
on. If you choose to copy four images, you have to select four
positions here.
• First Image Position: LEFT, TOP : X-000mm/Y-020mm, RIGHT,
BOTTOM: X-100mm/Y-100mm
• Second Image Position: LEFT, TOP : X-105mm/Y-020mm,
RIGHT, BOTTOM: X-205mm/Y-100mm
• Third Image Position: LEFT, TOP : X-000mm/Y-150mm, RIGHT,
BOTTOM: X-100mm/Y-230mm