14.8 <
Troubleshooting>
3 Open the guide in the direction shown and pull the jammed paper
gently out of the machine.
4 Ope
n and close the front cover to resume printing.
In the fuser area
1 Open the side cover.
2 Remove the jammed p
aper, in the direction shown.
If the jammed paper is inside the fuser, remove the jammed paper in the
direction show.
3 Close the side cover. Printing automatically resumes.
In the duplex unit area
If the duplex unit is not inserted correctly, paper jam may occur. Make
sure that the duplex unit is inserted correctly.
1 Op
en the side cover.
2 Remove the jammed
paper.
3 Close the
side cover.
To Next Page
Loading...
