Samsung CLX-8540ND - Page 207

Troubleshooting
Service Manual
4-45
Samsung Electronics
Code
NVM Description
(GUI)
Default
Max
/ Min
Function Description
05-110 DADF Bottom Edge
Erase
2 4/0 * This value sets the Bottom Skip at DADF Copy.
* This value 1 means 1mm skip.
* In case, the value is more than 2 :
Bottom Skip at DADF copy increases.
* In case, the value is less than 2 :
Bottom Skip at DADF copy decreases.
05-500 Platen Top Edge Erase 2 4/0 * This value sets the Top Skip at Platen Copy.
* This value 1 means 1mm skip.
* In case, the value is more than 2 :
Top Skip at Platen copy increases.
* In case, the value is less than 2 :
Top Skip at Platen copy decreases.
05-510 Platen Bottom Edge
Erase
2 4/0 * This value sets the Bottom Skip at Platen Copy.
* This value 1 means 1mm skip.
* In case, the value is more than 2 :
Bottom Skip at Platen copy increases.
* In case, the value is less than 2 :
Bottom Skip at Platen copy decreases.
05-700 ADF Roller Life Page
Counter
0 100000
/0
* DADF Pick up roller Page Counter
* When replacing a svc part, you can change the count to 0.
05-710 ADF Rubber Pad Life
Page Counter
0 100000
/0
* DADF Rubber Pad Page Counter
* When replacing a svc part, you can change the count to 0.