4-200
Troubleshooting
● Code : L-2 ● Vertical Random Streak 2/3
● Troubleshooting method :
3. Check if the T2 roller is installed properly. Re-install or replace the T2 roller.
4. Enter the EDC mode. Execute ‘T2 Engage/Disengage’ test to check if T2 Cam is operated properly.
5. If the problem persists, replace the fuser unit.
① Open the SIDE COVER.
② Remove the Guide.
③ Remove the T2 roller.
④ Check the T2 Roller contact point.
To Next Page
Loading...
