4-201
Troubleshooting
● Code : L-2 ● Vertical Random Streak 3/3
● Troubleshooting method :
6. Check if the HV contact point on imaging unit is contaminated.
7. If the problem persists, replace the HVPS-L, HVPS-S
8. If the problem persists, replace the harness between HVPS and imaging unit.
And measure the resistance between ground shield and High voltage output connector.
9. If the problem persists, replace the engine board Æ video board Æ LSU in order.
< HVPS-L PBA>
< HVPS-S PBA >
To Next Page
Loading...
