Samsung DVM - 02 series installation option

36
SETTING
02 series installation option
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
0 2 -
Fan control when
Thermo Off
Central control -
SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
1
Set to Enable
BLDC Fan and
Modulating Valve
Set BLDC Fan Speed
to High
Set BLDC Fan Speed
to Mid
Set BLDC Fan Speed
to Low
-
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
2 External control
External control
output
Operation voltage of
Modulating Valve
Temperature
difference of the
Modulating Valve
Step Control Output
Modulating Valve
Control Coefcient
SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
3 -
Heating setting
compensation
---

y
SEG5 (Central control) is set as 1 (Use) in default setting. Setting option is not necessary
when using central control. Error will not occur even when central control is not
connected, and change the value to 0 (Disuse) when excluding indoor unit from central
control.

y
When setting the option other than above SEG values, the option will be set as “0”.
Setting address of FCU KIT and installation option