114
Note:
Due to different specifications and features of other
Bluetooth devices, display and operations may be
different, and functions like transferring or exchanging
files may not be possible with all devices.
Rename or Unpair a Paired Device
Unpair a paired device to break the connection with your
device, but retain the knowledge of the pairing. At a later
point when you want to reconnect the device, there is no
need to setup the connection information again.
Note:
Disconnections often occur automatically if the
paired device goes out of range of your device or it
is powered off. Upon reconnection, you may be required
to re-enter all the previous pairing information.
1. Verify Bluetooth is active on your device.
2. From the Bluetooth settings screen, touch next to
the previously paired device.
•
Touch
Rename
to change the name of the paired device.
•
Touch
Unpair
to disconnect from the paired device.
Sending Contacts with Bluetooth
Depending on your paired devices’ settings and capabilities,
you may be able to send photos, Contact information, or
other items using a Bluetooth connection.
Note:
Prior to using this feature, Bluetooth must first be
enabled on both devices, and they must have Bluetooth
visibility turned on.
1. Verify your Bluetooth is active.
2. From the Home screen, touch
Contacts
.
3. Touch
More options
➔
Select
.
4. Touch each contact that you would like to send via
Bluetooth. A green check mark will appear next to each
entry you select.
5. Touch
Share
.
6. Touch
Bluetooth
.
7. Select the paired device to send the contact(s) to.
A Bluetooth share notification will appear in your
notifications area.
To Next Page
Loading...
