Getting Started 11
Using the Travel Charger
To use the Travel Charger:
1. Plug the flat end of the Travel Charger into the
Power/Accessory Interface connector and the other
end into a standard AC wall outlet.
2. When charging is finished, remove the flat end from
the interface connector jack on the device.
Note:
Failure to unplug the wall charger before you remove the
battery can cause damage to the device.
Important!
Verify that the battery is installed prior to
connection. If the battery is not properly installed
and the wall charger is connected, the device may
power off and on continuously, preventing proper
operation.
Warning!
If your device has a touch screen display, please
note that a touch screen responds best to a light
touch from the pad of your finger. Using excessive
force or a metallic object when pressing on the touch
screen may damage the tempered glass surface and
void the warranty.
To Next Page
Loading...
