Getting Started 13
To turn your device off:
1. Press and hold the
Power/Lock Key
until
the
Device options
screen displays.
2. Touch
Power off
to turn off the device.
3. At the
Power off
prompt, touch
OK
.
Locking and Unlocking the Screen
1. Press to lock the touch screen.
2. Press again to display the lock screen
then swipe your finger across the screen to unlock.
Note:
Swipe is the default screen locking method. To change
your screen lock, see “Home Screen” on page 169.
Setting Up Your Device
When you first turn on your device, you are asked to set up a
few things. To do that, several screens display. Some
screens can be skipped (touch
Skip
) or redisplayed (touch
Back
). Some screens display depending on the options you
choose.
1. When you first turn on your device, the
Let’s set up your
device!
screen displays.
2. The default language for your device is English. If you
would like to select Spanish, touch
Español
on the
bottom right side of the screen.
3. Touch
Terms & Conditions
, read the End User License
Agreement for Ready2Go, then touch
Back
.
4. Touch
get started
.
– or –
Touch
Remind Later
and then touch
exit
to set up your
device later. You can access Ready2Go by touching
Apps
➔
AT&T Ready2Go
.
5. Read and follow the instructions on each screen to set
up your device.
To Next Page
Loading...
