A picture was taken of a subject without setting an appropriate macro mode.
Select an appropriate macro mode to take a clear image.
• Taking a picture beyond the fl ash range.
Take a picture within the fl ash range.
• The lens is smudged or dirty.
• Flash off mode has been selected.
Dis-engage fl ash off mode.
• The camera mode can’t use the fl ash.
Refer to the FLASH instruction. (p.33)
Incorrect date and time is displayed
• The date and time have been set incorrectly or the camera has adopted
Reset the date and time correctly.
A card error has occurred while the memory card is in the camera.
• Incorrect memory card format.
Re-format the memory card.
The images don’t play back.
• Incorrect fi le name. (Violation of DCF format)
Do not change the image fi le name Colour of image is different to
Before contacting a service centre
Before contacting a service centre
Colour of image is different to the original scene.
• White balance or effect setting is incorrect.
Select appropriate White balance and effect.
Reset exposure compensation.
No image on external monitor.
• The external monitor has not been connected properly with the camera.
Check the connection cables.
• There are incorrect fi les in the memory card.
Insert a memory card that has correct fi les.
When using the PC’s explorer, the [Removable Disk] fi le does not show.
• Cable connection is incorrect.
• The operating system is not Windows 98SE, 2000, ME, XP, Vista / Mac
OS 10.1 ~ 10.4. Alternatively the PC does not support USB.
Install Windows 98SE, 2000, ME, XP, Vista / Mac OS 10.1 - 10.4 to
• The camera driver is not installed.
Install a [USB Storage Driver].
To Next Page
Loading...
