Samsung i85 - Inserting the memory card; There are 4 indicators for battery condition that are displayed on the LCD monitor.

016
Insert the battery as shown.
– If the camera does not turn on
after you have inserted battery,
please check whether the battery
is inserted with the correct
polarity (+/-).
– When the battery chamber
cover is opened, do not force it.
This may cause damage to the
battery chamber cover.

There are 4 indicators for battery condition that are displayed
on the LCD monitor.
Battery
indicator
Battery
status
The battery is
fully charged
Low battery
capacity
(Prepare to
recharge or
use spare
battery)
Low battery
capacity
Prepare to
recharge or
use spare
battery)
Battery empty.
Recharge or
use spare
battery.
Connecting to a power source
Connecting to a power source
Inserting the memory card
Inserting the memory card
Insert the memory card as shown.
- Turn off the camera’s power
before inserting the memory
card.
- Have the front of the memory
card facing toward the back of
the camera (LCD monitor) and
the card pins toward the front of
the camera (Lens).
- Do not insert the memory card
the wrong way round.
Doing so may damage the memory card slot.