Using the LCD monitor to adjust
You can use the menu on the LCD monitor to set up recording
Menus are subject to change without prior notice.
You can adjust the sharpness of the picture you are about to take. You
cannot check the sharpness effect on the LCD monitor before you
take a picture, because this function is applied only when the captured
image is stored on the memory.
The edges of the image are softened. This effect is
suitable for editing images on your PC.
The edges of the image are sharp.
This is suitable for printing.
The edges of the image are emphasized.
The edges will appear sharp, but noise may occur in
RECORDING
Sharpness
Contrast
Focus Area
Voice Memo
Voice Record
Back
Set
OK
Soft+
Soft
Normal
Vivid
Vivid+