Select an image that you want to enlarge and
Different parts of the image can be viewed by
pressing the 5 function button.
to the original full sized image.
– You can tell whether the image
displayed is an enlarged view by
checking the image enlargement
indicator shown at the top left of the
LCD monitor. (If the image is not an
enlarged view, the indicator will not
be displayed.) You can also check
– Movie clips and WAV fi les can’t be enlarged.
– If an image is enlarged, a loss of quality may occur.
The maximum enlargement rate in proportion to the image size
Trimming : You can extract part of the image that you want and
Select an image that you want to
enlarge and press the enlargement
a message will be displayed.
Select a desired sub menu by pressing
– [No]: The trimming menu will disappear.
– [Yes]: The trimmed image will be saved as a new fi le name, and
appear on the LCD monitor.
If there is not enough memory space to save the trimmed image, the
Using the camera buttons to set the camera
Using the camera buttons to set the camera
x 2.0
Confirm
OK
Trimming?
No
Yes
x 2.0