English-37
Storing Teletext Pages
Using FLOF to Select a Page
The various topics included in the teletext pages are color-coded, and
can be selected by pressing the colored buttons on the remote control.
1 Display the teletext contents page by pressing the TTX/MIX button.
2 Press the coloured button corresponding to the topic that you wish
to select; the available topics are given on the status line.
Result
:
The page is displayed with other coloured information
that can be selected in the same way.
3 To display the previous or next page, press the corresponding
coloured button.
4 To display the subpage, see the following steps.
◆
Press the SUBPAGE ( ) button.
Result
: The available subpages appear.
◆
Select the required sub-page.
Sub-pages can be scrolled by using the or button.
You can store up to four teletext pages to display them later at leisure.
1 Select the LIST mode using the LIST/FLOF ( ) button.
Result
: Four 3-digit numbers are displayed in different colors.
➣
The LIST/FLOF ( ) button is used to switch between
the LIST and FLOF modes.
2 Press the colored button corresponding to the page that will be
replaced.
3 Enter the new page number using the numeric buttons.
4 Repeat steps 2 and 3 for each page to be stored,
using a different colored button each time.
5 Press the (store) button until the corresponding blocks blink.
To Next Page
Loading...
