Camera
Section 2I. Camera 111
䡲 3 to take a series of three pictures.
䡲 5 to take a series of five pictures.
䡲 10 to take a series of ten pictures .
3. Press Capture (left softkey), , or to take
the pictures.
To shoot a series of combined pictures:
1. From camera mode, press Options (right softkey) >
Multi Shot > Divided Shot.
2. Select an option and press :
䡲 Off to deactivate the multiple shots option.
䡲 4 to take a series of four pictures to be combined
into one image.
䡲 9 to take a series of nine pictures to be combined
into one image.
䡲 16 to take a series of sixteen pictures to be
combined into one image.
3. Press Capture (left softkey), , or to take
the pictures. (The Multiple Shots folder will display
up to nine thumbnail pictures per screen.)
Using the Zoom
This feature allows you to zoom in on an object when
you take a picture. Depending on your resolution
settings, youc an adjust the zoom from 1x to 10x.
1. From camera mode, repeatedly press the
navigation key left to zoom out and right to zoom
in. It may take several presses to get the desired
zoom.
2. Press Capture (left softkey), , or to take
the picture. (The picture will automatically be saved
in your selected storage area.)
Selecting Camera Settings
1. From camera mode, press Options (right softkey) >
Settings...
2. Select an option and press :
䡲 Resolution to select a picture’s file size (2M, 1.3M,
High, Med, or Low).
䡲 Quality to select the picture quality setting (Fine,
Normal, or Economy).
Note
Zooming will not function when the resolution is set
to 2M.
Boost M540.book Page 111 Wednesday, March 24, 2010 4:48 PM
To Next Page
Loading...
