32 Section 2A. Phone Basics
Dialing and Saving Phone Numbers With
Pauses
You can dial or save phone numbers with pauses for
use with automated systems, such as voicemail or
credit card billing numbers.
There are two types of pauses available on your phone:
䢇 Hard Pause sends the next set of numbers when you
press . (This is indicated with a
P within the
number sequence.)
䢇 2sec Pause automatically sends the next set of
numbers after two seconds. (This is indicated with a
T within the number sequence.)
To dial or save phone numbers with pauses:
1. Enter the phone number.
2. Press Options (right softkey) > Hard Pause or 2sec
Pause.
3. Enter additional numbers.
4. Press to dial the number.
– or –
Press
Options (right softkey) > Save to save the
number in your Contacts.
Plus (+) Code Dialing
When placing international calls, you can use Plus
Code Dialing to automatically enter the international
access code for your location (for example, 011 for
international calls placed from the United States).
To make a call using Plus Code Dialing:
1. Press and hold until a “+” appears on your
phone display.
2. Dial the country code and phone number you’re
calling and press . (The access code for
international dialing will automatically be dialed,
followed by the country code and phone number.)
Note
You can have multiple pauses in a phone number
and combine two-second and hard pauses.
Note
When dialing a number with a hard pause, press
to send the next set of numbers.
Note
When you are calling from the United States, dial
"011", then the country code and phone number.
Boost M540.book Page 32 Wednesday, March 24, 2010 4:48 PM
To Next Page
Loading...
