Phone Basics
Section 2A. Phone Basics 33
Using Abbreviated Dialing
Abbreviated Dialing is similar to speed dialing. You can
use either of the following abbreviated dialing features.
䢇 Contacts Match – Retrieve any number saved in your
Contacts by entering only the last four to six digits of
the number.
䢇 Abbreviated Dialing – Prepend the first five or six digits
(for example, the area code and prefix) to any four or
five digits you enter. Press to dial the resulting
number.
To place a call using Contacts Match Abbreviated Dialing:
1. Enter the last four to six digits of a Contacts entry’s
phone number.
2. Press to call the displayed number.
䡲 If there is more than one matched number in your
Contacts, the Abbrev. Dial list displays. Select the
name you want to call from the list, and then
press to place a call.
To place a call using Prepend Abbreviated Dialing:
1. Enter the last four to five digits of the number.
2. Select the Abbrev. Dial entry from the screen and
press .
Dialing From the Contacts List
1. Highlight and press > Contacts.
– or –
Press
Contacts (right softkey) from the main menu.
2. Select the entry you want to call and press to
dial the entry’s default phone number.
– or –
To dial another number from the same entry, select
the name, press , and then select a number
and press .
Note
You must first activate the Call Match and/or
Abbreviated Dialing Settings to use these features.
For more information, see “Setting Abbreviated
Dialing” on page 63.
Boost M540.book Page 33 Wednesday, March 24, 2010 4:48 PM
To Next Page
Loading...
