28
2) Preparation of Ice-maker
2-1) Connect the water line to the water supply valve of refrigerator to supply water. (See how
to connect a water supply line in the owner’s manual.)
2-2) Push the bucket back fully so that the guide-ice of ice maker should not touch the back of
bucket. (If the back of bucket is touched the guide-ice of ice maker, the ice maker will not make
ice any more because of a ice full signal.)
2-3) It takes 6 hours to harvest a first ice, and throw away 2-3 times of these ice to make sure
the supplied water clean.
2. Product function
2-6. Ice-Maker Function
To Next Page
Loading...
Need help?
General
