67
4-7. Set Point Shift Function
Press Freezer Temp. and Power Cool buttons simultaneously for 12 seconds to get into this
mode.
In this mode, only the display LED for temperature will be ON.
4. Troubleshooting and major adjustment
Press both buttons simultaneously for 12 seconds
1) Initially, all products set the code, “0”
2) After 20 seconds from adjustment, a new setting will be stored in EEPROM and return to the
normal display.
3) Freezer Temp, Fridge Temp., Ice maker water supply, Ice tray temperature, can be adjusted
with this function.
To Next Page
Loading...
Need help?
General
