66
4-6. Load Operation Check Function
1) In the normal operation, press Power Freeze and Power
Cool buttons simultaneously for 6 seconds, then the display
panel will blink for 2 seconds.
2) Press Fridge Temp. button to get into this check mode ⓐ
with an audible tone.
3) Each illuminating LED segment stands for the component
which has an output signal from the control board.
4) This mode will terminate automatically after 30 seconds.
4. Troubleshooting and major adjustment
Press both buttons simultaneously for 6
seconds, all LED lights will be turned off. At
this time press buttonⓐ
※ For the REFRIGERATOR FAN, only one rpm is applied for the
current models, so that ☜ and ☜ show REFRIGERATOR FAN
operation only.
※ The FREEZER FAN and CONDENSER FAN are operated to High/Low
rpm automatically according to the operational condition.
※ ☜☜ and ☜ only explain the system operation state according to the
ambient condition
NO Contents
①
REFRIGERATOR FAN High or AC
motor operation
②
REFRIGERATOR FAN Low
③
REFRIGERATOR DEFROST heater
④
Start mode
⑤
Overload mode
⑥
Low-temperature mode
⑦
Exhibition mode
⑧
COMPRESSOR
⑨
FREEZER FAN High
⑩
FREEZER FAN Low
⑪
FREEZER DEFROST Heater
⑫
CONDENSER FAN High
⑬
CONDENSER FAN Low
⑭
Dispenser-Heater
⑮
Damper
-
Normal condition
Table of Load Mode Check List
To Next Page
Loading...
Need help?
General
