4
Cautions during Installation
Cautions during Operation
The user shall not install or
repair the product without
authorization.
The manufacturer does not assume
responsibility for damage to the
product resulting from attempts to the
user to install or repair it without
authorization.
Do not use the excessive force or
sharp objects to push the lock
buttons, as this can damage
the product.
Make sure that no unauthorized
person has the access to the
password.
To minimize the risk of burglary, it is
recommended that you periodically
change the password.
Do not operate the product with
wet hands, and keep liquids such
as water or drinks away from the
product, or the product may
malfunction or be damaged.
Make sure that the door is
completely closed when going
outside. The manufacturer
does not assume the
responsibility for any harm
caused by engagement of
the lock on an improperly
closed door.
Do not install the product in the
place where the gap between
the door and the frame is 5mm
or more.
If the gap is too wide, the product may
not function properly.