Samsung SRN-1673S - Page 103

English _103
● MENU SETUP
SSL
You can select a security connection system or install public certificates.
[MENU]  [ENTER]  ▼  <Menu>  [ENTER]  ▼  <Network>  ►▼  <SSL>  [ENTER] 
▲▼◄►  [ENTER]
• Secured Connection System : You can select a type of security connection system.
- HTTP (Non-secured connection)
- HTTPS (Secured connection using unique certificate)
- HTTPS (Secured connection using public certificate)
• Install Public Certificate : You can scan and register public certificates to be installed.
If you want to use a certificate, you need to install a certificate file along with and an encryption file.
` The <HTTPS (Secured connection using public certificate)> menu can be selected only if there is a registered public
certificate.
802.1x
When connecting to a network, you can select whether to use the 802.1x protocol and install a corresponding
certificate.
802.1x is a certificate system for the server and the client. It can guarantee robust performance against hacking
into the Tx/Rx network data, virus or information leaks.
By using this system, you can block access from a client who is not certified and only allow communication to
certified users and thus increase the level of security.
[MENU]  [ENTER]  ▼  <Menu>  [ENTER]  ▼  <Network>  ►▼  <802.1x>  [ENTER]  ▼
 <Network>  ▲▼◄►  [ENTER]
• EAPOL Version : Select the EAPOL version to be used as protocol.
` Some switch hubs will not operate if you set them to version <2>. Select version <1>.