6. If there are 16 or less cameras searched, it will be automatically registered and the camera information(fps,
days of recording) will be displayed.
•If there are 16 or less cameras searched
•If there are more than 16 cameras searched
Select a camera to register and click the <Register> button. Once camera registration is finished, proceed in
the same steps as after auto registration.
1. The searched camera will be automatically
registered and the initial recording value
will be displayed.
2. In the camera registration window, click the
<Cancel> button to modify the recording
settings automatically set.
After selecting a camera, press the register button.
Camera Register
Cameras searched
Refresh
Status
|
Model
|
IP
|
MAC
|
Network
|
Connected Authentication errors Disconnected
Exit
Register
0/16
To Next Page
Loading...
