English _101
● LIVE VIEWER
To print a screen
1. Click < > button.
2. Print current camera’s video image with the printer
connected to the PC operating the Web Viewer.
To save as AVI
1. Click < > button.
When “AVI Setup” window appears, select the record saving
path and capacity.
2. Select a desired path, enter the maximum recording
capacity, and then click [OK] button.
` Save current channel’s video as .avi file.For playing a video clip, you
can use the free video player to play the video.
(ex: GOM Player, KM Player, etc.)
` After saving an AVI file, install the CODEC when playing it in Windows Media Player.
` However, the video may not played properly, depending on the CODEC compliance of the player.
At least 1GB of free space is required for recording.
J
` While recording current data in Web Viewer, you cannot select Split Mode buttons, switch to the previous/next screen, or
activate Auto Sequence function.
` If the viewer is running without the administrator’s permission in Windows Vista / 7, you may not change a folder when
saving a video as AVI file.
To stop manual recording
1. Click < > button.
A dialog box pops up, asking you if you wish to stop
recording manually.
2. Click [OK] if you wish to stop recording.
Recording in NVR is stopped.
To Next Page
Loading...
