Channel Setting
You can configure the video settings for each channel.
•
Video
-
<ON/OFF> : You can turn ON/OFF the selected channel's camera.
-
<Covert1> : Shows information other than the video of the selected channel.
For privacy protection, it does not display the video while the recording continues.
-
<Covert2> : Shows nothing but an empty screen while the recording continues.
M
` If the channel is set to <Covert1> or <Covert2> mode, the channel’s sound is not hearable.
However, the channel’s sound is recorded if its Audio setting is set to <ON>, even the sound is not heard in Live mode.
•
Audio
-
If set to <ON>, you can turn the audio of the channel ON/OFF on the Live screen.
-
If set to <OFF>, the channel's audio is off on the Live screen and not recorded.
•
Camera Name : Provide a camera Name.
` You can enter up to 15 characters including space.
•
Dwell Time : You can specify the dwell time for each channel.
•
Scan Type : Select either Interlace or Progressive as necessary.
` Video quality may degrade if set to Interlaced for a progressive network camera.
` Set to Progressive for progressive network cameras, and set to Interlaced for interlaced network cameras.
To Next Page
Loading...
