26_ live
GETTING STARTED
Starting the system
1. Connect the power cable of the NVR to the wall outlet.
2. Press the Power button on the front panel.
3. You will see the initialization screen.
The initialization process will last about 2 minute.
If a new HDD is installed, the initialization process may take
longer.
4. The live screen appears with a beep.
Shutting Down the System
1. Press [POWER] on the remote control, or select
<Shutdown> from the Live screen menu.
2. The "Shutdown" confirmation window appears.
3. Use the direction buttons on the remote control to move to
<OK> and press [ENTER] or just click <OK>.
The system will shut down.
M
` Only the user with the "shutdown" permission can shut down
the system.
` For the permission management, refer to "Permission Management > Setting Permissions". (Page 48)
live
REC
REC
To Next Page
Loading...
