English _27
● LIVE
Login
If you want to access a specific NVR menu or restricted menu, you must obtain the applicable permissions to
do so.
1. In Live mode, right-click any area, or press [MENU] on the
remote control.
You will see the context menu on the screen as shown.
2. Select <Login>.
The login dialog appears.
` The Login dialog will appear if you press any of the login-related menu
buttons on the remote control.
J
` The initial administrator ID is “admin” and the password should be
set when logging in for the first time.
` ID allows alphanumeric characters only.
` Password allows only alphanumeric letters and special characters
other than <\> and <">.
` Set password for your wireless network if you use the product with a wireless router. Being not protected with password or
using the default wireless router password may expose your video data to potential threat.
` Please change your password every three months to safely protect personal information and to prevent the damage of the
information theft.
Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a password.
M
` For the restricted permission, refer to "Permission Management > Setting Permissions". (Page 48)
Locking All Buttons
You may choose to lock the entire buttons on the remote control or front panel to restrict access to the menus,
or unlock the entire buttons.
1. In Live mode, press buttons in the order of
[
STOP
(
@
)]
;
[FREEZE]
;
[
STOP
(
@
)]
;
[FREEZE]
;
[MENU].
All buttons will be locked.
2. In the lock condition, press any button to display a dialog
where you are prompted to enter the password for unlocking
the buttons.
The button lock will be released if you enter the admin
password.
To Next Page
Loading...
