Camera Setting
You can change the video settings of a registered network camera for each channel.
•
Select Camera : Select the camera channel to change the video transmission settings.
•
Profile : Show a video profile for the connected camera.
•
Codec : Show the codec information for the selected profile.
•
Resolution : You can change the resolution of the selected profile.
•
Send Rate : You can change the baud rate of the selected profile.
•
Quality : You can change the video quality of the selected profile.
M
` If you change the settings of a specific profile for each model, the effective range of the baud rate may be changed
accordingly.
Ex) if you set the baud rate of the first profile to 30fps, the send rate of the second profile will be changed to 15fps.
` Menu items except Codec, Resolution, Transfer Rate, and Transfer Quality can be configured in the network camera’s settings
menu.
` If you change the current profile settings, you may encounter an interrupted playback on the recording or live screen for a
certain time.
` Changes made in Camera Setup page are applied immediately, while changes made through the camera's web page may
require up to 3 minutes.
To Next Page
Loading...
