DEFAULT SETTING
To reset the system, move to “System Management > Settings > Load Factory Default” and press the <Default>
button.
This returns the factory default settings.
` The default settings are based on SRN-1670D.
` The initial administrator ID is “admin” and the password should be set when logging in for the first time. (When accessing the web viewer,
the initial admin password is “4321”.)
` Please change your password every three months to safely protect personal information and to prevent the damage of the information theft.
Please, take note that it’s a user’s responsibility for the security and any other problems caused by mismanaging a password.
Category Details Factory Default
System
Date/Time/Language Date/Time/Language
Date YYYY-MM-DD
Time 24 hours
Time Zone GMT
Time Sync. OFF
DST OFF
Language English
Permission
Management
Admin ID admin
Group
Group None
Group Authority
User Group All
Setup
Restricted Access
Backup/Record Stop/
Search/PTZ/Remote
Alarm Out/Shutdown
Restriction on Network Access
Auto Log out 3 Min
Manual Input of ID
System Management System Information Device Name NVR
Device
Camera Camera
Video ON
Audio OFF
Camera Name CAM 01 ~ CAM 16
Dwell Time 5 sec
Scan Type Progressive
Storage Device HDD Alarm
Check Alarm Output Port OFF
Duration OFF
Replace Alarm Output Port OFF
Duration OFF
Remote Device
Remote Control ON
ID 00
To Next Page
Loading...
