English _35
● LIVE
• If pressing the right [
►
] button in 4-split mode :
Channel (CH 1~4) ; Channel (CH 5~8) ; Channel (CH 9~12) ; Channel (CH 13~16) ; Auto Sequence
Channel Setting
You can display the channel in a desired area of a split screen.
1. Place the cursor over the camera name of each channel to display the <
▼
> key to the right on the screen.
2. Click a camera name to display a channel list where you can select a different channel.
3. Select a desired channel and click it.
The current channel will be switched to the selected one.
Use the cursor to select a channel to move, and drag and drop it to a desired channel; this can also change
the channel position.
` Ex : if switching CH 1 to CH 7
Switching to Single Mode
When in split mode, select and double-click a desired channel to switch to its Single mode.
Press the number corresponding to a desired channel on the remote control to switch to its Single mode.
Refer to "Remote Control > Using the numeric buttons". (Page 13)
` Ex : If double-clicking CH 3 or pressing the number "3" on the remote control.
To Next Page
Loading...
