Mailing Service
You can send an e-mail to a NVR-registered user at a specific time interval, or if an event occurs.
M
` If the camera is set to <OFF> or the channel’s event is Video Loss, a notification is sent to the designated email address only
in text.
SMTP Setting
Sets the SMTP mail server.
[MENU]
▼
<
Network
>
►▼
<Mailing Service> [ENTER] <SMTP>
▲▼◄►
[ENTER]
•
ServerType : Displays the connected server type.
•
Server : Enter a server to connect to.
•
Port : Sets the communication port.
•
Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
•
User : Enter a user to use authentication when connecting to the SMTP server.
•
Password : Enter the password of the SMTP server user.
•
Secure Transfer : Select one from <Never> and <TLS (if available)>.
•
Sender : Use the virtual keyboard to enter the sender's e-mail address.
` Refer to "Using Virtual Keyboard". (Page 45)
•
TEST : Conducts the test on the server settings.
To Next Page
Loading...
