Chapter 5. The Main Menu 48
5.8. Recording
5.8.1. While Recording Screen
Figure 5.3.: The while recording screen
Selecting the Recording option in the Main Menu enters the Recording Screen,
whilst pressing Long Select or Long Right enters the Recording Settings (see sec-
tion 10 (page 88)). The Recording Screen shows the time elapsed and the size of
the file being recorded. A peak meter is present to allow you set gain correctly. There
is also a volume setting, this will only affect the output level of the player and does
not affect the recorded sound. If enabled in the peak meter settings, a counter in front
of the peak meters shows the number of times the clip indicator was activated during
recording. The counter is reset to zero when starting a new recording.
The frequency and channels settings are shown in the status bar.
The controls for this screen are:
The Rockbox manual (version 3.14) Sansa Fuze+
To Next Page
Loading...
