Chapter 7. Playback Settings 66
Fade In Delay. The “fade in delay” is the length of time between when the crossfade
process begins and when the new track begins to fade in.
Fade In Duration. The length of time, in seconds, that it takes your music to fade in
once the Fade In Delay has ended.
Fade Out Delay. The “fade out delay” is the length of time between when the crossfade
process begins and when the old track begins to fade out.
Fade Out Duration. The length of time, in seconds, that it takes your music to fade
out once the Fade Out Delay has ended.
Fade Out Mode. If set to Crossfade, one song will fade out and the next song will
simultaneously fade in. If set to Mix, the ending song will not fade out at all, and
will continue to play as normal until its end with the starting song fading in from
under it. Mix mode is not used for manual track skips, even if it is selected here.
Note: The rules above apply except in the instance where Fade Out Delay plus Fade
b
Out Duration is less then Fade In Delay (which would create a gap in the audio).
In this case, the Fade In Delay is reduced to eliminate the gap.
The graphic below illustrates how the different settings work in practice.
7.8. Replaygain
This allows you to control the replaygain function. The purpose of replaygain is to
adjust the volume of the music played so that all songs (or albums, depending on your
The Rockbox manual (version 3.14) Sansa Fuze+
To Next Page
Loading...
Need help?
General
