Sansui STB-HD01 - Specifications

Section
Detailed section
Explanation
Terrestrial Input Signal
Input Frequency
VHF: 174MHz to 230MHz
UHF: 520MHz to 820MHz
Transmission System
Channel Assignment
Channel Bandwidth
Channel Offset
Input Signal Level
Antenna Input
Loop Output
OFDM Spectrum Mode
Modulation Modes
Guard Interval Modes
FEC Modes
DVB-T/OFDM
Australian Channel Assignment
7MHz
+/- 125KHz
-90dBm ~ -20dBm
75 Female IEC-Connector (PAL Type)
75 Male IEC-Connector (PAL Type)
2K and 8K Hierarchical
QPSK, 16QAM, 64QAM
1/32, 1/16, 1/8, 1/4 Active Symbol Duration
Rate 1/2, 2/3, 3/4, 5/6, 7/8
Algorithm
MPEG-2 compatible MP@ML, MP@HL
Decoding Format
All of Australia Digital TV Standard
Display Aspect Ratio
16:9 or 4:3
All of Australia Digital TV Standard
HD YPbPr/HD VGA Simultaneous Output
Native Mode : 1080i, 720p, 576p (DVI Output)
CRT Display : (1250), 1152i, 576p
HD Video Output
SD Video Output
Common use of YPbPr/ RGB - 576i component
output
Composite Video Output
S-video(Y/C), Composite Video(CVBS)
Algorithm
MPEG-1 layers 1 and 2, MPEG-2 layers 2
Dolby Digital (AC-3)
Frequency Response
20Hz~ 20 kHz, < 2dB
Sampling Frequency
32, 44.1 and 48 kHz
Analog Audio Output
Stereo (RCA phone jack), 2.0Vrms, >10K ohm
(2 Sets)
Digital Audio Output
S/PDIF optical(TOS Link), S/PDIF coaxial(RCA)
Audio
Video
38
Specifications