SANY SCC1000C - Page 71

- 87/250 -
Section 1 Maintenance
SCC1000C Crawler Crane — Maintenance Manual
Checking Oil Level of Main Hoisting Winch
Checking procedures:
1. Park the machine on a at level surface,
2. Remove the oil level plug,
3. If the oil surface can be seen, the oil is sufcient.
If not, the oil is insufcient (see Fig.T103 3001).
CAUTION
If an oil leak is detected while checking
t h e o i l l e v e l , s t o p t h e o p e r a t i o n
temporarily and disassemble the system
for further check� Such work can only be
carried out by trained and experienced
professionals�
Oil lling plug
T103 3002
https://cranemanuals.com