PLAYING BACK IMAGES RECORDED IN THE NORMAL RECORDING
AREA
Zooming the image during playback
Press the ZOOM button during playback.
The zoom frame (blue) appears in the center of the screen.
Move the zoom frame to the position where the image is to
be enlarged.
•
Turn the jog dial clockwise to move the zoom frame to the right.
Turn it counterclockwise to move the zoom frame to the left.
•
Turn the shuttle dial clockwise to change to vertical movement. Then turn the
jog dial clockwise to move the zoom frame upward and turn it
counterclockwise to move the zoom frame downward.
Move the zoom frame to the position to be enlarged.
Turn the shuttle dial.
The area inside the zoom frame is enlarged (2x).
Press the ZOOM button (to cancel zooming).
The image zooming is canceled and normal playback continues.
Note:
•
The display cannot be enlarged even while monitoring a camera image.
•
The ZOOM button cannot be selected, when a multiplexer is used as a video
input.
•
The picture quality becomes coarser when the image is zoomed.
ZOOM
1
2
3
11-17-01
02:36:00 EN 0.10SEC
ZOOM
4
11-17-01
02:36:00 EN 0.10SEC
English
21
To Next Page
Loading...
