EasyManua.ls Logo

Sanyo DSR-3000 - Product Specifications; Hardware and Storage Specifications; Input;Output Terminals Specifications; Power and Environmental Specifications

Sanyo DSR-3000
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
Hard disk capacity : 80 GB or 160 GB
Television System : NTSC color signal standard
Picture Resolution : 720 x 240 (Field), 720 x 480 (Frame)
Compression : M-JPEG
Picture Quality : 5 Levels (Basic, Normal, Enhanced, Fine, Super Fine)
Recording Type : Frame or Field Recording
Recording Speed : 27 Levels.
Recording Area : Normal Recording Area, Alarm Recording Area, Archive Area
Playback : Playback, Still, Search
Zoom : 2 Times Zoom Function
Search Mode
Time/Date Search : Search by time and date
Alarm Search : Search by alarm event list
Alarm Thumbnail Search : Search by alarm event thumbnails
Archive Area Search : Search Archive Area with event list
Smart Motion Search : Search by specifying a motion sensor
Menu Language : English/French/Spanish
Clock settings : Year/month/day/hours/minutes/seconds
Video input terminal : 1.0 Vp-p/75 , unbalanced, BNC x 1
S- video input terminal : Separate YC signals, DIN connector (S terminal) x 1
Y signal: 1.0 Vp-p/75 , unbalanced, synchronous; C signal: 0.286 Vp-p/75 , unbalanced
Digital input terminal : RJ-45 x1
Digital SUB input terminal : RJ-45 x1
Audio input terminal : 8dBs, 27 k unbalanced, RCA pin jack x 1
Microphone input terminal : 60dBs 10k unbalanced, 3.5mm mini jack
Video output terminal : 1.0 Vp-p/75 , unbalanced, BNC x 1
S- video output terminal : Separate YC signals, DIN connector (S terminal) x 1
Y signal: 1.0 Vp-p/75 , unbalanced, synchronous; C signal: 0.286 Vp-p/75 , unbalanced
Loop out terminal : 1.0 Vp-p/75 , unbalanced, BNC x 1
S- video loop out terminal : Separate YC signals, DIN connector (S terminal) x 1
Y signal: 1.0 Vp-p/75 , unbalanced, synchronous; C signal: 0.286 Vp-p/75 , unbalanced
Digital output terminal : RJ-45 x1
Digital SUB output terminal : RJ-45 x1
Audio output terminal : 8dBs, 600 unbalanced, RCA pin jack x 1
Compact Flash Slot : Compact Flash Type 2 (Front)
PC Card Slot : PCMCIA Type 2 (Rear) for SCSI or Ethernet card
RS-232C terminal : D- SUB 9pin (for PC)
Control connectors
RS-485 terminal : Push lock (3 terminals: A, B, C (GND))
Remote Control terminal : 1 input for resister alley switch
Alarm in terminal : 1 input (Normal Open Low level active)
Alarm out terminal : 1 output (Normal 5V Low level active)
Alarm reset terminal : 1 input (Normal Open Low level active)
SW out terminal : 1 output (Normal 5V Low level active)
NON Rec out terminal : 1 output (Normal 5V Low level active)
Clock Adjust in terminal : 1 input (Normal Open Low level active)
Clock Adjust out terminal : 1 output (Normal 5V Low level active)
Warning out terminal : 1 output (Normal 5V Low level active)
Disk Full out terminal : 1 output (Normal 5V Low level active)
Alarm Full out terminal : 1 output (Normal 5V Low level active)
Power : AC 120V, 60 Hz
Power consumption : 26 W 400 mA
Operating environment : Temperature: 5°C to 40°C, Humidity: 10 to 80%
Dimensions : 420 (W) x 86 (H) x 364.5 (D) mm
Weight : Approx. 5.5 kg
Products are subject to change in design and specifications without notice and without incurring any obligation.
76
English

Table of Contents

Other manuals for Sanyo DSR-3000

Related product manuals